shower box

Shower enclosure in a niche with sliding door opening and clean, essential design, also thanks to the suspended handle that is perfectly integrated into the shaped glass that houses it when closed. The upper crosspiece is also made of glass to maximise transparency and offer an innovative and effective technical solution. The solution is suitable for installation in niches with screen widths from 108 to 200 cm.

Corner shower enclosure with sliding door opening and clean, essential design, also thanks to the suspended handle that is perfectly integrated into the shaped glass that houses it when closed. The upper crosspiece is also made of glass to maximise transparency and offer an innovative and effective technical solution. The Screen + Fixed side solution is suitable for corner installations with screen widths from 108 to 199 cm. The fixed side can be any depth up to 119 cm. Fixed sides over 120 cm wide are available on request, with special packaging.

Shower enclosure in a niche with sliding door opening fitted as standard with the “Soft Close” assisted closing system, for a clean and essential design. When the enclosure closes, the handle ""disappears"" into the upright, which becomes integral again. The solution is suitable for installation in niches with widths from 98 to 200 cm.

Corner shower enclosure with sliding door opening fitted as standard with the “Soft Close” assisted closing system, for a clean and essential design. When the enclosure closes, the handle ""disappears"" into the upright, which becomes integral again. The Screen + Fixed side solution is suitable for corner installations with screen widths from 98 to 200 cm. The fixed side can be any depth up to 119 cm.

A clean, minimalist-design shower enclosure for alcove installations, featuring a sliding door. The Alis unit utilizes a magnetic closure system and is free of plastic seals. The sliding panel can be easily released from the bottom and tilted inward, simplifying maintenance and cleaning. The overlap between the sliding panel and the fixed section is minimized to maximize the entry width. This solution is suitable for alcove installations with opening widths ranging from 96 to 160 cm.

A clean, minimalist-design shower enclosure for a recess, featuring a sliding door. The "Alis Wall + Fixed Side" model utilizes a magnetic closure system and is free of plastic seals. The sliding panel can be easily released from the bottom and tilted inward, simplifying maintenance and cleaning. The overlap between the sliding panel and the fixed section is minimized to maximize the entry width. The Wall + Fixed Side configuration is suitable for corner installations with a tray width ranging from 96 to 160 cm. The fixed side can be customized to the desired depth, up to 120 cm.

Shower enclosure in a niche with outward opening hinged door and with a clean and essential design also thanks to the integrated handle (rather than the more traditional knob), which "disappears" in the jamb upright. The solution is suitable for installation in niches with door widths from 59 to 99 cm.

Shower enclosure in a niche with outward opening hinged door, with a clean and essential design, also thanks to the small knob. The solution is suitable for installation in niches with screen widths from 59 to 99 cm.

Corner shower enclosure with outward opening hinged door, with a clean and essential design thanks to the integrated handle (rather than the more traditional knob) that ""disappears"" into the jamb upright. The Door + Fixed side solution is suitable for corner installations with door widths from 59 to 99 cm. The fixed side can be any depth from 59 to 119 cm.

Corner shower enclosure with outward opening hinged door, with a clean and essential design also thanks to the small knob. The Door + Fixed side solution is suitable for corner installations with door widths from 59 to 99 cm . The fixed side can be any depth from 59 to 119 cm.

Shower enclosure in a niche with outward opening hinged door and with a clean and essential design also thanks to the integrated handle (rather than the more traditional knob), which ""disappears"" in the jamb upright. The solution is suitable for installation in niches with screen widths from 80 to 199 cm. You can also decide, at no extra cost, how to divide the available opening width between the opening part and the fixed part.

Shower enclosure in a niche with outward opening hinged door, with a clean and essential design, also thanks to the small knob. The solution is suitable for installation in niches with screen widths from 80 to 199 cm . You can also decide, at no extra cost, how to divide the available opening width between the opening part and the fixed part .

Corner shower enclosure with outward opening hinged door, with a clean and essential design thanks to the integrated handle (rather than the more traditional knob) that ""disappears"" into the jamb upright. The Screen + Fixed side solution is suitable for corner installations with a screen with door widths from 80 to 200 cm . The fixed side (without door) can be any depth from 59 to 119 cm. You can also decide, at no extra cost, how to divide the available opening width between the opening part and the fixed part.

Corner shower enclosure with outward opening hinged door, with a clean and essential design also thanks to the small knob. The Screen + Fixed side solution is suitable for corner installations with a screen with door widths from 80 to 200 cm . The fixed side (without door) can be any depth from 59 to 119 cm. You can also decide, at no extra cost, how to divide the available opening width between the opening part and the fixed part.

Walk-in shower enclosure in a niche with outward opening hinged door that allows you to choose the width of the part of the door that moves inwards, up to 50 cm. The handle, when closed, is integrated into the vertical upright. The solution is suitable for installation in niches with screen widths up to 120 cm and for bathrooms where there is sufficient space to open the hinged door outwards.

Corner shower enclosure with outward opening hinged door that allows you to choose the width of the part of the door that moves inwards, up to 50 cm. The handle, when closed, is integrated into the vertical upright. The Door + Fixed side solution is suitable for corner installations with door widths up to 120 cm and for bathrooms where there is sufficient space to open the hinged door outwards. The fixed side can be any depth up to 119 cm.

Shower door for niche installation with inward / outward opening. There is also a steel profile at the bottom of the opening panel to ensure optimum water tightness even when installed flush with the floor. This solution is suitable for installation in niches between 50 and 99 cm wide.

Corner shower enclosure with inward / outward opening door. There is also a steel profile at the bottom of the opening panel to ensure optimum water tightness even when installed flush with the floor. The Door + Fixed side solution is suitable for corner installations with door widths from 50 to 99 cm. The fixed side can be any depth up to 119 cm.

Corner shower enclosure with inward / outward opening door and on-wall side panel. There is also a steel profile at the bottom of the opening panel to ensure optimum water tightness even when installed flush with the floor. The Door + on-wall side panel solution is suitable for both corner and niche installations, with door widths from 50 to 99 cm. The on-wall side panel can be any depth up to 139 cm.

Shower enclosure in a niche with inward / outward opening door. There is also a steel profile at the bottom of the opening panel to ensure optimum water tightness even when installed flush with the floor. The Screen solution is suitable for niche installations with screen widths from 80 to 199 cm. You can choose the width of the opening part and the fixed part at no extra cost.

Corner shower enclosure with inward / outward opening door. There is also a steel profile at the bottom of the opening panel to ensure optimum water tightness even when installed flush with the floor. The Screen + Fixed side solution is suitable for corner installations with panel widths from 80 to 199 cm. The fixed side can be any depth up to 119 cm. You can choose the width of the opening part and the fixed part at no extra cost, and you can decide whether to position the opening panel next to the screen or next to the profile of the corner fixed side.

Walk-in shower consisting of simple partition walls that subtly blend into the room without being overpowering. The steel stabilising tie-rods provide strength, stability and safety. This solution is suitable for installations up to 200 cm wide.

Walk-in shower with PVD finish consisting of simple partition walls that subtly blend into the room, without being overpowering. The steel stabilising tie-rods provide strength, stability and safety. This solution is suitable for installations up to 200 cm wide.

Walk-in shower consisting of simple partition walls that subtly blend into the room without being overpowering. The steel stabilising tie-rods provide strength, stability and safety. The Fixed solution with mobile panel is suitable for installations with panel widths from 70 to 189 cm. It is also possible to change the width of the mobile panel at no extra charge.

Walk-in shower with PVD finish consisting of simple partition walls that subtly blend into the room, without being overpowering. The steel stabilising tie-rods provide strength, stability and safety. The Fixed solution with mobile panel is suitable for installations with panel widths from 70 to 189 cm. It is also possible to change the width of the mobile panel at no extra charge.

Corner walk-in shower consisting of simple partition walls that subtly blend into the room, without being overpowering. The steel stabilising tie-rods provide strength, stability and safety. This solution is suitable for corner installations up to 200 cm wide.

Walk-in shower in the centre of the bathroom consisting of simple partition walls that subtly blend into the room without being overpowering. The steel stabilising tie-rods provide strength, stability and safety. This solution is suitable for central bathroom installations with widths from 90 to 200 cm.

starting with the elegant vertical handle, with the option of adding the "Soft Close" assisted closing system to cushion the closing.

Corner shower enclosure with sliding door opening and elegant vertical handle. The "Soft Close" assisted closing system is available as an optional, which cushions the closing of the box. Made without plastic gaskets, the Screen + Fixed side solution is suitable for corner installations with screen widths from 98 to 200 cm. The fixed side can be any depth up to 119 cm.

Three-sided shower enclosure with sliding door opening and two fixed sides , with elegant vertical handle. The ""Soft Close"" assisted closing system is available as an optional, which cushions the closing of the box. Made without plastic gaskets, the Screen + Fixed side solution is suitable for three-sided installations with door widths from 98 to 220 cm. The two fixed sides can be any depth up to 99 cm.

Shower enclosure with sliding door opening and on-wall side panel, with elegant vertical handle. The ""Soft Close"" assisted closing system is available as an optional, which cushions the closing of the box. Made without plastic gaskets, the Screen + on-wall side panel solution is suitable for both corner and niche installations, with double door widths from 98 to 220 cm. The on-wall side panel can be any depth up to 139 cm.

Shower enclosure in a niche with symmetrical sliding opening with central door , fitted with an elegant vertical handle. The "Soft Close" assisted closing system is available as an optional, which cushions the closing of the box. The symmetrical solution with central door, without plastic gaskets, is suitable for larger niche installations, with opening widths from 155 to 250 cm.

Shower enclosure in a niche with asymmetrical sliding opening with central door, fitted with an elegant vertical handle. The "Soft Close" assisted closing system is available as an optional, which cushions the closing of the box. The Asymmetric solution with central door, without plastic gaskets, is suitable for medium and large niche installations with opening widths from 128 to 220 cm.

Shower enclosure in a niche with sliding doors and electronic Move opening system: Just press the button that replaces the handle to move the panel smoothly (it only needs to be connected to a 12V power supply). Made without plastic gaskets, this solution is suitable for niche installations, with opening widths from 101 to 199 cm.

Corner shower enclosure with sliding doors and electronic Move opening system: Just press the button that replaces the handle to move the panel smoothly (it only needs to be connected to a 12V power supply). Made without plastic gaskets, the Screen + Fixed side solution is suitable for corner installations with screen widths from 101 to 199 cm. The fixed side can be any depth up to 119 cm.

Shower enclosure in a niche with hinged door opening where the minimalist lines of the stainless steel counterpoint the rectangular and featured hinges. This solution is suitable for installation in niches between 50 and 99 cm wide.

Corner shower enclosure with hinged door where the minimalist lines of the stainless steel counterpoint the rectangular and featured hinges. The Door + Fixed side solution is suitable for corner installations with door widths from 59 to 99 cm and for bathrooms where there is sufficient space to open a hinged door outwards. The fixed side can be any depth up to 119 cm.

Shower enclosure on three sides with hinged door opening where the minimalist lines of the stainless steel counterpoint the rectangular and featured hinges. The door + two fixed sides solution is suitable for three-sided installations with two fixed sides and door widths from 59 to 99 cm and for bathrooms where there is sufficient space to open the hinged door outwards. Each fixed side can be any depth up to 99 cm.

Shower enclosure with hinged door and on-wall side panel where the minimalist lines of the stainless steel counterpoint the rectangular and featured hinges. The Door + on-wall side panel solution is suitable for both corner and niche installations, with door widths up to 99 cm. The on-wall side panel can be any depth up to 139 cm.

Shower enclosure in a niche with hinged door opening where the minimalist lines of the stainless steel counterpoint the rectangular and featured hinges. The Screen solution is suitable for niche installations with screen widths from 80 to 229 cm.

Corner shower enclosure with hinged door where the minimalist lines of the stainless steel counterpoint the rectangular and featured hinges. The Screen + Fixed side solution is suitable for three-sided installations, with two fixed sides and screen widths from 80 to 229 cm. The fixed side can be any depth up to 119 cm.

Shower enclosure on three sides with hinged door opening where the minimalist lines of the stainless steel counterpoint the rectangular and featured hinges. The Screen + two fixed sides solution is suitable for three-sided installations with a screen width (consisting of the opening part and the fixed part) from 80 to 229 cm. Each fixed side can be any depth up to 99 cm.

Corner shower enclosure with sliding doors that combines lightness and functionality. This enclosure allows the glass panels to be lifted in order to thoroughly clean the edge of the shower tray for even greater hygiene. This is made possible by small magnets flush with the glass, invisible to the naked eye, which ensure that the enclosure is perfectly watertight. The solution is suitable for corner installations with single door widths from 67 to 120 cm.

Shower door for niche installation with inward / outward opening , which optimises the space available and offers many different solutions for the bathroom, allowing sanitaryware and accessories to be arranged in the most functional way. The door solution is suitable for installation in niches with door widths from 50 to 99 cm. Enclosure without dam profile available on request.

Door for shower in a niche with inward / outward opening double door, which optimises the space available and offers many different solutions for the bathroom, allowing sanitaryware and accessories to be arranged in the most functional way. The double door solution is suitable for installation in niches with widths from 60 to 139 cm. It is also possible to choose the width of the opening panel and the fixed part at no extra cost.

Corner shower enclosure with inward / outward opening , which optimises the space available and offers many different solutions for the bathroom, allowing sanitaryware and accessories to be arranged in the most functional way. The Door + Fixed side solution is suitable for corner installations with door widths from 50 to 99 cm. The** fixed side** can be any depth up to 119 cm.

Corner shower enclosure with inward / outward opening double door and fixed side, which optimises the space available and offers many different solutions for the bathroom, allowing sanitaryware and accessories to be arranged in the most functional way. The Double door + Linear fixed side solution is suitable for corner installations with double door widths from 60 to 139 cm. The fixed side can be any depth up to 119 cm. It is also possible to choose the width of the opening panel and the fixed part at no extra cost.

Three-sided shower enclosure with inward / outward opening double door and two fixed sides, which optimises the space available and offers many different solutions for the bathroom, allowing sanitaryware and accessories to be arranged in the most functional way. The Double door + Linear fixed side solution is suitable for three-sided installations with double door widths from 60 to 139 cm. The two fixed sides can be any depth up to 119 cm. It is also possible to choose the width of the opening panel and the fixed part at no extra cost.

Corner shower enclosure with inward / outward opening double door and on-wall side panel , which optimises the space available and offers many different solutions for the bathroom, allowing sanitaryware and accessories to be arranged in the most functional way. The Double door + On-wall side panel solution is suitable for corner installations with double door widths from 60 to 139 cm. The on-wall side panel can be any depth up to 139 cm. It is also possible to choose the width of the opening panel and the fixed part at no extra cost.

Shower enclosure in a niche with inward / outward opening, which optimises the space available and offers many different solutions for the bathroom, allowing sanitaryware and accessories to be arranged in the most functional way. The door solution is suitable for niche installations with door and fixed side widths from 80 to 189 cm. Enclosure without dam profile available on request. It is also possible to choose the width of the opening panel and the fixed part at no extra cost.

Shower door for niche installation with fixed part and inward / outward opening door, ideal for a complex design environment. Being able to divide the width of the screen between the fixed and opening panel allows you to optimise both the entrance opening and the outward and inward space taken up by the movable door panel. This solution is suitable for installation in niches between 70 and 139 cm wide.

Corner shower enclosure with fixed part and inward / outward opening door, ideal for complex design environments. Being able to divide the width of the screen between the fixed and opening panel allows you to optimise both the entrance opening and the outward and inward space taken up by the movable door panel. The Door + Fixed side solution is suitable for corner installations with door widths from 70 to 139 cm. The door can be small or large. The fixed side can be any depth up to 119 cm.

Corner shower enclosure with fixed part and inward / outward opening door and on-wall side panel, ideal for complex design environments. Being able to divide the width of the screen between the fixed and opening panel allows you to optimise both the entrance opening and the outward and inward space taken up by the movable door panel. The Door + on-wall side panel solution is suitable for situations where the shower enclosure is next to a bath or a lower wall, both at an angle and in line with the door itself, with door widths from 70 to 139 cm. The on-wall fixed panel can be of any height and width up to 139 cm.

Shower enclosure in a niche with two fixed panels and inward / outward opening door ideal for a complex design environments. Being able to divide the width of the screen between the fixed and opening panel allows you to optimise both the entrance opening and the outward and inward space taken up by the movable panel. The Screen solution is suitable for niche installations with panel widths from 100 to 219 cm.

Corner shower enclosure with 2 fixed parts and 2 inward / outward opening doors ideal for complex design environments. Being able to divide the width of the screen between the fixed and opening panel, or having a fixed side+door or even a single opening panel, allows you to optimise both the entrance opening and the outward and inward space taken up by the mobile panel. The solution is suitable for corner installations with single door widths up to 119 cm.

Shower enclosure in a niche with hinged door opening in which the square elements that cover the hinges express all the solidity of stainless steel. In addition, the freely positionable hinges offer a variety of compositional solutions. This solution is suitable for installation in niches between 70 and 139 cm wide.

Corner shower enclosure with hinged door in which the square elements that cover the hinges express all the solidity of stainless steel. In addition, the freely positionable hinges offer a variety of compositional solutions. The Door + Fixed side solution is suitable for corner installations with door widths from 70 to 139 cm and for bathrooms where there is sufficient space to open a hinged door outwards. The door can be small or large. The fixed side can be any depth up to 119 cm.

Shower enclosure with hinged door opening and on-wall linear side panel in which the square elements that cover the hinges express all the solidity of stainless steel. In addition, the freely positionable hinges offer a variety of compositional solutions. The Door + on-wall side panel solution is suitable for both corner and niche installations, with door widths from 70 to 139 cm. The on-wall side panel can be any depth up to 139 cm.

Shower enclosure in a niche with hinged door opening in which the square elements that cover the hinges express all the solidity of stainless steel. In addition, the freely positionable hinges offer a variety of compositional solutions. The Screen solution is suitable for niche installations with panel widths from 100 to 229 cm.

Corner shower enclosure with hinged door in which the square elements that cover the hinges express all the solidity of stainless steel. In addition, the freely positionable hinges offer a variety of compositional solutions. The Screen + Fixed side solution is suitable for corner installations with panel widths from 100 to 229 cm. The fixed side can be any depth up to 119 cm.

Shower door in a niche with folding door opening, which adapts perfectly to different spaces, creating an almost full-width entrance. The innovative double pivot hinge allows you to choose the opening direction (inward-outward or outward-inward). The solution is suitable for niche installations with door widths up to 130 cm and for bathrooms where there is insufficient space for medium/large glass doors/leaves to open outwards. You can choose the size of the two glass panels that make up the shower enclosure/door (or opening side).

Corner shower enclosure with folding door opening, which adapts perfectly to different spaces, creating an almost full-width entrance. The innovative double pivot hinge allows you to choose the opening direction (inward-outward or outward-inward). The Door + Fixed side solution is suitable for corner installations with door widths up to 130 cm and for bathrooms where there is insufficient space for medium/large glass doors/leaves to open outwards. The fixed side can be any depth up to 119 cm. You can choose the size of the two glass panels that make up the shower enclosure/door (or opening side).

Shower enclosure in a niche with folding door opening, which adapts perfectly to different spaces, creating an almost full-width entrance. The innovative double pivot hinge allows you to choose the opening direction (inward-outward or outward-inward). The door + Linear fixed side solution is suitable for niche installations with a door width of up to 130 cm and for bathrooms where there is insufficient space for medium/large glass doors/leaves to open outwards. The fixed side can be any depth up to 119 cm. You can choose the size of the two glass panels that make up the shower enclosure/door (or opening side).

Shower enclosure in a niche with folding door and on-wall side panel, which adapts perfectly to different spaces, creating an almost full-width entrance. The innovative double pivot hinge allows you to choose the opening direction (inward-outward or outward-inward). The Door + On-wall side panel solution is suitable for niche installations with door widths up to 130 cm and for bathrooms where there is insufficient space for medium/large glass doors/leaves to open outwards. The fixed side can be any depth up to 119 cm. You can choose the size of the two glass panels that make up the shower enclosure/door (or opening side).

Corner shower enclosure with double folding door opening, which adapts perfectly to different spaces, creating an almost full-width entrance. The innovative double pivot hinge allows you to choose the opening direction (inward-outward or outward-inward) of the two doors. The Box solution is suitable for corner installations with double door widths up to 130 cm and for bathrooms where there is insufficient space for medium/large glass doors/leaves to open outwards. You can choose the size of the two glass panels that make up the shower enclosure/door (or opening side).

Shower enclosure in a niche with hinged door opening, refined and discrete. The hinges and other details are characterised by a vertical design, almost becoming one with the uprights. This solution is suitable for installations up to 95 cm wide.

Corner shower enclosure with hinged door opening, refined and discrete. The hinges and other details are characterised by a vertical design, almost becoming one with the uprights. This solution is suitable for installations up to 95 cm wide.

Shower enclosure in a niche with hinged door opening, refined and discrete. The hinges and other details are characterised by a vertical design, almost becoming one with the uprights. This solution is suitable for installations between 90 and 199 cm wide.

Shower enclosure in a niche with hinged door opening, refined and discrete. The hinges and other details are characterised by a vertical design, almost becoming one with the uprights. The Panel + Fixed side solution is suitable for corner installations with panel widths from 90 to 199 cm. The fixed side can be any depth up to 119 cm.

Curved shower enclosure with exclusive stainless steel profiles and two inward / outward opening doors. Installed close to the inside edge of the standard shower tray or directly on the floor.

Curved shower enclosure with self-supporting structure and central sliding door. Installed close to the inside edge of the standard shower tray or directly on the floor.